Order online or Call us at1-888-870-0884 M-F 8:30AM-5:00PM Pacific Time

Section Width Sample

P225/50R16 91S

The 225 indicates this tire is 225 millimeters across from the widest point of its outer sidewall to the widest point of its inner sidewall when mounted and measured on a specified width wheel. This measurement is also referred to as the tire's section width. Because many people think of measurements in inches, the 225mm can be converted to inches by dividing the section width in millimeters by 25.4 (the number of millimeters per inch).

225mm ÷ 25.4 = 8.86"

Sidewall Aspect Ratio Sample

P225/50R16 91S

The 50 indicates that this tire size's sidewall height (from rim to tread) is 50% of its section width. The measurement is the tire's section height, and also referred to as the tire's series, profile or aspect ratio. The higher the number, the taller the sidewall; the lower the number, the lower the sidewall. We know that this tire size's section width is 225mm and that its section height is 50% of 225mm. By converting the 225mm to inches (225 ÷ 25.4 = 8.86") and multiplying it by 50% (.50) we confirm that this tire size results in a tire section height of 4.43". If this tire were a P225/70R16 size, our calculation would confirm that the size would result in a section height of 6.20".

Expressatvs Tire Upgrade Calculator

If you see this message, your browser does not support Java Applets and you will not see the Tire Calculator above. Instead, use the calculator below.